管家婆正版资料网站

Sina Weibo | Tencent Weibo | Favorites Jiebo | Online Message | Site Map

Welcome to Wuxi Jiebo Instrument Technology Co., Ltd.!

杰博科技

Precision from instruments · Trust in Geber Precision instruments from

National Consulting Hotline: 400-858-0166

杰博科技

首页 » 杰博新闻中心 » 杰博资讯 » 常见问题 » 高频红外碳硫分析仪做样后要查看样品是否充分燃烧 You are here: Home » Jiebo News Center » Jiebo News » Frequently Asked Questions » High Frequency Infrared Carbon Sulfur Analyzer

After making a sample with a high-frequency infrared carbon and sulfur analyzer, check whether the sample is fully burned

】 Article Source: Editor-in-Chief: Release time: 2016-09-01 15:07:00 Hits: - [Large Middle Small]

Infrared carbon and sulfur analyzer samples will burn completely, and whether the sample is burned sufficiently will play a significant role in the analysis of carbon and sulfur.

The analysis principle of the infrared carbon and sulfur analyzer is to put the test sample into a high-frequency furnace, and oxidize the carbon and sulfur in the test sample to C02, C0, and S02 by oxygen oxidation at the high temperature of the combustion furnace. After the dust removal and water purification device, oxygen is loaded into the sulfur detection cell to measure sulfur.

The mixed gas containing CO2, CO, SO2 and O2 enters the heating catalytic furnace together. After the catalytic furnace catalyzes the conversion of CO-> CO2, SO2-> SO3, this mixed gas is introduced into the carbon detection cell for measurement after passing through the sulfur removal reagent tube Carbon and residual gases are emitted outdoors through the analyzer. The output of the carbon and sulfur detector is pre-amplified, and the A / D conversion is sent to a microcomputer system for data processing. Finally, the percentage content of carbon and sulfur is obtained, which achieves the analysis effect.

The more fully the sample is burned, the more complete the released gas will be, and the more accurate the test result will be. Therefore, we must be used to seeing whether the burned sample is completely burned correctly. If it cannot be burned completely, find out the correct analysis method to make the sample Fully burned.

Wuxi Jiebo CS996 infrared carbon and sulfur analyzer is used together with WF-L88 high frequency induction combustion furnace, which can quickly and accurately determine steel, iron, alloy, foundry core sand, non-ferrous metal, cement, ore, coke, catalyst Mass fraction of carbon and sulfur in other materials. This set of equipment introduces advanced foreign technology. It is a high-tech product integrating light, machinery, electricity, computer, and analysis technology. It has a wide measurement range, strong anti-interference ability, complete functions, easy operation, and accurate and reliable analysis results. Features.

Wuxi Jiebo Instrument Technology Co., Ltd. All rights reserved Record number: 苏 ICP 备 10025668 号 -6
Phone: 400-858-0166 Fax: 0510-84601616
Address: 26-9 Huibei Road, Optoelectronic New Material Industrial Park, Liangxi District, Wuxi City
Technical Support: Avatar Networks

微信二维码 Wechat QR code

手机二维码 Scan your phone

管家婆资料免费公开 管家婆图香港正版 管家婆彩图大全资料 管家婆免费版资料大全 正版管家婆马报彩图 管家婆港彩免费资料大全 管家婆今期码报资料 管家婆资料大全管家婆2020 管家婆精选高手资料 香港管家婆马报彩图 管家婆资料大全 管家婆码报彩图马报料 管家婆期期准免费资料2020 管家婆马报图今晚资料143期 采金网免费资料管家婆 管家婆2020开奖结果 2020管家婆手机论坛 管家婆资料大全管家婆图片 管家婆资料大全管家婆一图 管家婆精选心水资料站